Advanced Search

• Item:
  Asus CROSSHAIR Socket AM2 motherboard
• CPU Support:
  AMD Socket AM2 Athlon 64 X2 / Athlon 64 FX / Athlon 64/ Sempron
  AMD Cool 'n' Quiet Technology
  AMD64 architecture enables simultaneous 32-bit and 64-bit computing
  AMD Live! Ready
• Chipset:
  NVIDIA nForce® 590 SLI MCP
  NVIDIA LinkBoost Technology
• Front Side Bus:
  2000 / 1600 MT/s
• Memory:
  Dual channel memory architecture
  4 x DIMM, max. 8GB, DDR2-800/667/533, ECC and non-ECC, un-buffered
• Expansion Slots:
  2 x PCI Express x16 slot with NVIDIA® SLI technology support
  1 x PCI Express x4
  3 x PCI 2.2
• SLI:
  Support two identical NVIDIA SLI-Ready graphics cards
• Storage:
  NVIDIA nForce® 590 SLI MCP supports
  1 x Ultra DMA 133 / 100 / 66 / 33
  6 x Serial ATA 3.0Gb/s
  NVIDIA MediaShield RAID supports RAID 0, 1, 0+1, 5 and JBOD
  Silicon Image® 3132 SATA controller supports
  2 x External Serial ATA 3.0Gb/s port on back I/O (SATA On-the-Go)
  Support RAID 0, 1, and JBOD
• LAN:
  Dual Gigabit LAN controllers support NVIDIA DualNet® technology
  NVIDIA nForce® 590 SLI MCP built-in dual Gigabit MAC with external
  Marvell PHY
  Support Teaming and fail-over functions
  Support TCP/IP Acceleration
• Audio:
  SupremeFX Audio Card
  featuring ADI 1988B 8-channel High Definition Audio CODEC
  Support Jack-Sensing, Enumeration, Multi-streaming and Jack-Retasking
  8 channel audio ports
  Coaxial, Optical S/PDIF out on back I/O port
• IEEE 1394a:
  TI 1394 controller supports 2 x 1394a ports
• USB:
  max. 10 USB2.0/1.1 ports
• Overclocking Features:
  
  * ASUS AI NOS (Non-delay Overclocking System)
  * AI Overclocking (intelligent CPU frequency tuner)
  * AI Clock Skew
  * ASUS PEG Link - automatically performance tuning for graphics cards
• * ASUS O.C. Profile:
  overclocking configuration-sharing tool
  * ASUS C.P.R.(CPU Parameter Recall)
  * Extreme Tweaker
• Back Panel I/O Ports:
  
  1 x PS/2 Keyboard port
  1 x PS/2 Mouses
  1 x Optical + 1 x Coaxial S/PDIF Output
  2 x External SATA
  2 x LAN (RJ45) port
  4 x USB 2.0/1.1 ports
  1 x IEEE 1394a port
  1 x onboard LED switch
  1 x LCD Poster
• Internal I/O Connectors:
  
  3 x USB 2.0 connectors supports additional 6 USB 2.0 ports
  1 x Floppy disk drive connector
  1 x IDE connector for two devices
  6 x SATA connectors
  1 x CPU / 7 x option Fan
  3 x thermal sensor connector
  1 x IEEE1394a connector
  1 x S/PDIF output connector
  Chassis Intrusion connector
  Front Panel Audio connector
  24-pin ATX Power connector
  8-pin ATX 12V Power connector
  System panel connector
  1 x EL I/O Shield Connector
• BIOS:
  8Mb AWARD BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.3
• Accessories:
  1 x SLI bridge
  1 x ASUS Array Mic
  1 x ASUS Optional Fan
  1 x ASUS Q-Connector Kit (system panel; Retail version only)
  3 x thermal sensor cables
  1 x UltraDMA 133/100/66 cable
  1 x Floppy disk drive cable
  6 x SATA cables
  7 x Cable Ties
  3 x SATA power cable for 6 devices
  1 x 2-port USB2.0 module
  1 x IEEE1394a module
  1 x EL I/O Shield
  InterVideo® Media Launcher (OEM version only)
  User's manual
• Form Factor:
  ATX Form Factor, 12"x 9.6" (30.5cm x 24.5cm)
• Windows Vista:
  This motherboard is one of the "ASUS Vista Certified Models." Other Windows Vista Certified components require to install Windows Vista. Please visit www.microsoft.com/windowsvista/ for more information.

					A blemish begins approximately 2-3 weeks before it appears on your skin's surface. It starts in your sebaceous hair follicles, the tiny holes commonly called pores. Here’s how it happens: Pore Deep within each follicle, your sebaceous glands are working to produce sebum, the oil that keeps your skin moist and pliable. A blemish begins approximately 2-3 weeks before it appears on your skin's surface. It starts in your sebaceous hair follicles, the tiny holes commonly called pores. Here’s how it happens: Clogged Pore As your skin renews itself, the old cells die and slough off. When cells are shed unevenly, they clump together with natural skin oil to form a plug — much like a cork in a bottle. A blemish begins approximately 2-3 weeks before it appears on your skin's surface. It starts in your sebaceous hair follicles, the tiny holes commonly called pores. Here’s how it happens: The Birth of a Blemish This plug, or comedo, traps oil and bacteria inside the follicle. As the skin continues to produce oil, the pore swells...and bacteria flourish.

The most important thing to remember about acne is: It's not your fault. Contrary to popular belief, acne is not caused by anything you're doing - what you eat, how often you wash your face or work out - but by a combination of factors at work far beneath the surface of your skin. The regularity with which you shed skin cells can change throughout your life. Your hormone balance affects the rate at which you produce oil. Research has also shown that genetics play a big part in the development and persistence of acne, so your family history is a valuable prediction tool as well. You're not alone: About 90% of all teenagers develop acne. Acne is starting at even younger ages today as puberty begins earlier. Acne may also start as late as the 20's or 30's, especially in women whose hormones are constantly fluctuating. It's estimated that 1 in 4 adults between the ages of 25 and 44 experiences acne, and nearly half of all adult women experience mild to moderate acne. There's still no cure for acne, with or without a prescription. The secret to controlling acne is PREVENTION - stopping the formation of acne before it becomes a visible pimple. To avoid the risk of permanent scars, it's important to treat acne as soon as the first signs appear. Even after blemishes disappear, you usually must continue to use an effective acne treatment to keep new blemishes from forming. Proactiv Solution is safe and effective for everyone, and it can help prevent blemishes from becoming a larger problem. For most forms of acne, Drs. Rodan and Fields prefer topical medications. They may prescribe antibiotics for inflammatory nodular and cystic type acne, and Accutane for more severe cases. Oral antibiotics and Accutane don't cure acne - like topical medications, they gain control of the problem. Please keep in mind that Accutane is the strongest oral medication available for acne and often can make a dramatic difference. But it may have severe side effects, including depression, liver damage and birth defects if taken during pregnancy. Patients must be under a dermatologist's supervision for the 5-month course of treatment. Proactiv Solution can heal your existing acne, and help stop new blemishes from forming. Its mild formulations gently exfoliate your skin, remove excess oil, and deliver powerful acne-attacking medicine. Proactiv Solution works alone or; when following your doctor's advice, in combination with a dermatologist's prescription.

Acne can't be cured, with or without a prescription. Even after blemishes disappear, you must continue to use an effective acne treatment to keep new blemishes from forming. Our expert dermatologists have created a breakthrough way to treat acne safely and effectively. Combination Therapy® uses several different medicines in one system to heal the blemishes you have now and help keep new ones from forming.

					Renewing Cleanser Tiny, smooth grains unclog the pore and help remove dead skin cells. Benzoyl peroxide penetrates deep to attack bacteria. Revitalizing Toner A gentle alcohol-free formula helps to balance skin tone and remove dead skin cells, while preparing the pore for the Repairing Lotion. Repairing Lotion Finely milled benzoyl peroxide penetrates deep into the pore to attack bacteria, healing existing blemishes and preventing new ones from forming.

Proactiv Solution is a Combination Therapy® acne management system - it combines prescription-grade ingredients in a system that works together to heal and prevent acne. Developed by two Stanford-trained dermatologists, this unique acne fighting system combines finely milled benzoyl peroxide, sulfur, and our special formulation. These ingredients gently exfoliate your skin, unplug your pores, attack acne-causing bacteria, and soothe inflammation. Many of the acne medications you buy at the store are "spot treatments," designed primarily to get rid of existing acne, one pimple at a time, with harsh creams that can cause redness or irritation. Gentle and effective, doctor-developed Proactiv Solution is designed to be used on the whole face (or acne-prone area) every day. It gets rid of existing acne - and proactively helps prevent future breakouts before they even surface on your skin. And since it's formulated with soothing botanicals like allantoin, panthenol, aloe and chamomile, it leaves your skin feeling healthy and hydrated... instead of dry and flaky.
	Proactiv Solution's unique formulations work together to knock out acne in 3 easy steps: Renewing Cleanser: gently exfoliates your pores and allows the benzoyl peroxide to penetrate. Revitalizing Toner: helps unclog your pores and remove dead skin cells. Repairing Lotion: allows delivery of benzoyl peroxide deep into your pores to attack acne-causing bacteria at the source.
Proactiv Solution also offers a Refining Mask that boosts the effects of your 3-Step System. This cool, soothing formula includes sulfur to refine pores and help heal existing acne more quickly. Work it into your skin care routine 2-3 times per week for even more acne-fighting power!

Products Information

Q: How is Sheer Cover® Mineral Foundation SPF 15 different?
A: Sheer Cover® is so light you can't even feel it on your skin. Yet it gives you exceptional coverage and a sheer finish that ordinary makeup cannot always provide. The natural minerals adhere to the skin, so you need very little to cover imperfections. The mineral pigments blend with your own skin to give you a natural, flawless look. Sheer Cover Mineral Makeup goes beyond covering up flaws—it’s makeup that’s actually good for your skin!

Sheer Cover's patent-pending Mineral Foundation SPF 15 benefits include:

• Helps protect skin from oxidative stress and future damage with age-defying Green Rooibos Tea.
• Helps defend your skin from the visible signs of premature aging with SPF 15 protection.
• Deflects light from flaws with Mica to minimize the look of fine lines, pores and other imperfections.
• Contains 100% pure minerals from the earth that feel lightweight and look totally natural.
• Contains NO preservatives, chemical dyes, fragrance, silicones, or talc.
• Gives skin a natural luminosity that stays true all day.
• Is perfect for all ages and skin types.
• Offers adjustable coverage so you can use as much or as little as you want.
• Provides complete coverage in just one step by incorporating both Foundation and Finishing Powder in one.
• Soothes and calms irritations with Zinc Oxide.
• Won’t settle into fine lines & wrinkles.
• Is formulated with our “True shade technology” to ensure that the powders blend in with your skin tone for a perfect color match.
• Is sweat-proof so you can even wear it when you work out.

Q: How can Sheer Cover® provide so much coverage without looking thick and cakey?
A: Ordinary foundations may be so thick that they look like a mask, or so thin that you have to apply layer after layer. They coat the skin like a layer of icing, and they can wear off or be absorbed into the skin to fill pores and fine lines. The natural minerals in Sheer Cover lay on the skin lightly, in an overlapping fashion to provide complete coverage. Mica, one of the minerals in Sheer Cover, reflects light to give your skin a natural, luminous look. Instead of looking like you're hiding something, Sheer Cover makes it look like you have nothing to hide.

Q: What other ingredients are in Sheer Cover® Mineral Foundation SPF 15?
A: It's what's NOT in Sheer Cover Mineral Foundation SPF 15 that makes it great for your skin. The exclusive formulation contains no oil, no perfumes, no dyes and no talc. Click here to see a complete ingredient list.